{"id":7036831,"date":"2026-08-10T17:19:19","date_gmt":"2026-08-10T17:19:19","guid":{"rendered":"https:\/\/peraltafinancing.com\/air-compressor\/adding-to-efficiency-and-effectiveness\/"},"modified":"2026-08-10T17:19:19","modified_gmt":"2026-08-10T17:19:19","slug":"adding-to-efficiency-and-effectiveness","status":"publish","type":"post","link":"https:\/\/fivemor.com\/?p=7036831","title":{"rendered":"Adding to Efficiency and Effectiveness"},"content":{"rendered":"


\n<\/p>\n

\n

Accessories can add much needed enhancements to assist in making your application as efficient and effective as possible. The same is true when it comes to our Cabinet Cooler Systems<\/a>. Among the most essential accessories for our products are compressed air filters<\/a> and regulators, which we highly recommend using with all our offerings, as well as with other brands. The Filter Separator<\/a> effectively eliminates water, dirt, and rust from your compressed air system, while its 5-micron filter element prevents contaminants from clogging or damaging your equipment. For even more precise filtration, an Oil Removal Filter<\/a> should be installed downstream of the Filter Separator<\/a>; this filter utilizes a 0.03-micron element to remove oil and solid particulates. Additionally, our Pressure Regulators<\/a> allow you to set the desired operating pressure, and we advise maintaining the minimum pressure necessary for optimal performance. This not only conserves air consumption but also fine-tunes the efficiency of EXAIR products in various applications.<\/p>\n

\"\"<\/a>
From left to right; a few value added accessories for your Vortex Tube: Hot Muffler, Cold Muffler, Automatic Drain Filter Separator, Oil Removal Filter, and Solenoid Valve\/Thermostat Kit.<\/figcaption><\/figure>\n

A Cold Air Distribution Kit is an additional accessory available with our Cabinet Cooler Systems<\/a> that enhances their efficiency. This kit features a length of flexible vinyl tubing designed to channel cold air for optimal circulation or to target specific hot spots. It also includes tubing connectors and adhesive-backed clips to secure the tubing in place.<\/p>\n

Solenoid valves<\/a> and thermostats are effective tools for conserving compressed air. Cabinet Cooler Systems <\/a>equipped with thermostat control utilize a solenoid valve <\/a>and thermostat to regulate the flow of compressed air, activating it only when cooling is necessary. The thermostat is preset to 95\u00b0F (35\u00b0C) and typically maintains a temperature within \u00b12\u00b0F (1\u00b0C) inside the cabinet. Solenoid valves are available in various voltage options, including 120V at 60Hz, 110V at 50Hz, 240V at 50\/60Hz, and 24VDC. All solenoids are CSA Certified and either UL listed or recognized.<\/p>\n

\n
\"\"<\/a><\/figure>\n<\/div>\n

EXAIR\u2019s<\/a> Side Mount Kits<\/a> facilitate the installation of cooling systems on the sides of electrical enclosures, particularly beneficial in scenarios where vertical or top mounting is impractical. It is important to note that NEMA 4 and 4X Cabinet Cooler Systems<\/a> must be installed in a vertical orientation. These kits preserve the NEMA ratings for both large and small enclosures classified as Type 12, 4, and 4X, and they fit into standard electrical knockouts measuring 1-1\/2 NPS. The Side Mount Kits<\/a> designed for NEMA 12 Cabinet Cooler Systems<\/a> are constructed from aluminum, while those intended for NEMA 4 and 4X systems are made from either Type 303 or Type 316 stainless steel.<\/p>\n

If you have questions about the\u00a0Cabinet Cooler Systems<\/a> accessories,\u00a0or anything regarding\u00a0EXAIR\u00a0<\/a>and our products, please do not hesitate to reach out.<\/p>\n

Jason Kirby
Application Engineer
Email:\u00a0jasonkirby@exair.com<\/a>
Twitter:\u00a0@EXAIR_jk<\/a><\/p>\n<\/p><\/div>\n