{"id":7030746,"date":"2026-08-06T20:08:10","date_gmt":"2026-08-06T20:08:10","guid":{"rendered":"https:\/\/peraltafinancing.com\/5g-technology\/dual-beam-chipset-supports-10-7-14-5-ghz-frequency-range-for-satellite-terminals\/"},"modified":"2026-08-06T20:08:10","modified_gmt":"2026-08-06T20:08:10","slug":"dual-beam-chipset-supports-10-7-14-5-ghz-frequency-range-for-satellite-terminals","status":"publish","type":"post","link":"https:\/\/fivemor.com\/?p=7030746","title":{"rendered":"Dual-beam chipset supports 10.7 – 14.5 GHz frequency range for satellite terminals"},"content":{"rendered":"


\n<\/p>\n

\n

\"\"EnSilica has announced two Ku-band beamformer integrated circuits, the ENS92051 and ENS92052, which offer best-in-class power consumption and performance. They are designed to address the needs of the next generation of electronically steered antennas for a range of user terminals used with LEO, MEO, and GEO satellite constellations.<\/p>\n

The ENS92051 is a dual-beam Ku-band receiver (Rx) supporting eight channels with separate amplitude and phase control. The Rx carrier frequency range is 10.7 to 12.75 GHz with an instantaneous bandwidth of 500 MHz.<\/p>\n

The ENS92052 is the Ku-band transmitter supporting eight channels with separate amplitude and phase control. The Tx carrier frequency range is 13.75 to 14.5 GHz with an instantaneous bandwidth of 125 MHz.<\/p>\n

The eight channels of the chipset can support four dual-polarisation or eight single-polarisation elements. The highly integrated devices offer low-power and low-cost operation using phase and amplitude controls with a built-in temperature sensor, and the transmitter has an integral power detector. The chipset includes a beam table to support very low-latency beam switching and supports a range of power-saving modes.<\/p>\n

The device SPI bus and control pins operate from standard 1.8V logic at speeds up to 50 MHz, the core voltage is 1.0 V. Both chips come in a 63-pin Wafer Level Chip Scale Package.<\/p>\n

The devices will be fabricated and tested in Europe, offering customers a European sovereign supply chain. They are designed to meet the requirements of DO-254 DAL 5 and are qualified to AEC-Q100 automotive grade 2.<\/p>\n

The chipset is available for sampling to lead customers.<\/p>\n\n

Filed Under: Active Components<\/a>, Antennas<\/a>, Development tool<\/a>, Network hardware<\/a>, Tools<\/a><\/span>
Tagged With: ensilica<\/a><\/span>
\u00a0<\/p>\n\n