{"id":341006,"date":"2025-12-12T21:40:13","date_gmt":"2025-12-12T21:40:13","guid":{"rendered":"https:\/\/peraltafinancing.com\/air-compressor\/differences-between-an-exair-adjustable-spot-cooler-and-cold-gun-aircoolant-system\/"},"modified":"2025-12-12T21:40:13","modified_gmt":"2025-12-12T21:40:13","slug":"differences-between-an-exair-adjustable-spot-cooler-and-cold-gun-aircoolant-system","status":"publish","type":"post","link":"https:\/\/fivemor.com\/?p=341006","title":{"rendered":"Differences Between an EXAIR Adjustable Spot Cooler and Cold Gun Aircoolant System"},"content":{"rendered":"


\n<\/p>\n

\n
\n
\"\"<\/a>
Adjustable Spot Cooler<\/figcaption><\/figure>\n<\/div>\n
\n
\"\"<\/a>
Cold Gun Aircoolant System<\/figcaption><\/figure>\n<\/div>\n

Have you ever wondered about the differences between the Adjustable Spot Cooler and the Cold Gun?\u00a0<\/p>\n

In their most basic form, these two items are very similar \u2013 both require a compressed air supply, both produce localized cold air flows, both have magnetic bases, and both have the same basic profile. \u00a0However, under closer scrutiny, we can see that the Adjustable Spot Cooler can pivot on its magnetic base.\u00a0 It also has the ability to vary the cold fraction and thereby vary the cold outlet temperature and flow.\u00a0 The Adjustable Spot Cooler is supplied with multiple generators which allow for control of the compressed air inlet flow \u2013 yet another way to vary the cooling capacity of the Adjustable Spot Cooler.<\/p>\n

\n
\"\"<\/a>
Model 3925 Adjustable Spot Cooler System has a Dual Outlet Hose Kit for distribution of cold air flow to two points.<\/figcaption><\/figure>\n<\/div>\n

These distinctions make the Adjustable Spot Coolers<\/a> the most versatile spot cooler on the market.\u00a0 They can be used in many applications in which the exact cooling capacity is not known, a target temperature is required, or if the application requires temperature variations.\u00a0 \u00a0For example, if a customer has an application where a specific temperature is required or if shrinking\/expansion is critical, the Adjustable Spot Cooler can provide a solution unavailable with a Cold Gun. \u00a0EXAIR offers them with either a single outlet for direct cooling or a dual outlet to capture both sides.\u00a0<\/p>\n

\n
\"\"<\/a><\/figure>\n<\/div>\n

The Cold Gun, on the other hand, produces a preset volume at a specific temperature drop.\u00a0 This is great for applications with steady heat loads like machining, grinding, or laser cutting; or for applications in which you need to be free from tampering.\u00a0 The Cold Gun will produce consistent performance without any modification needed from the end user.\u00a0 EXAIR offers two types, the Cold Gun Aircoolant System<\/a> and High Power Cold Gun Air Coolant System, which gives twice the cooling capacity.\u00a0 Both units can be purchased with a single outlet hose or a dual output hose.\u00a0<\/p>\n

There are many applications for our Spot Coolers.\u00a0 They help remove heat to extend tool life, and they can help eliminate coolant to improve production rates.\u00a0 If you have an application where you need to remove heat and do not know which unit to select, an Application Engineer<\/a> at EXAIR is here to help you.\u00a0<\/p>\n

John Ball
Application Engineer
Email: johnball@exair.com
<\/a>Twitter: @EXAIR_jb<\/a><\/p>\n

\n

Like this:<\/h3>\n

Like<\/span><\/span> Loading…<\/span><\/p>\n

<\/div>\n<\/p><\/div>\n