EXAIR\u2019s Vortex Tubes<\/a> are a great product for many cooling applications. When supplied with a clean and moisture-free source of compressed air, they will generate two streams of airflow, one hot and one cold. They are a low-cost and reliable solution, capable of producing temperatures ranging from -50\u00b0F to +260\u00b0F. We have flow rates from 1scfm to 150scfm, producing refrigeration over 10,000btu\/hr.<\/p>\n With this wide range of performance possible, it may be a bit daunting trying to select the right model of Vortex Tube. In this blog I am going to explain the differences between the two different series that we offer: 32XX and 34XX, and why you would want to choose one over the other.<\/p>\n The difference between the two model types comes down to the Cold Fraction, which is determined by where the Control Valve is positioned. When you open the Control Valve (by turning it counterclockwise, as shown by the blue arrow in the photo to the right), it decreases the Cold Fraction, which leads to a reduced flow and a significant drop in temperature in the cold air discharge. Conversely, closing the Control Valve (by turning it clockwise, indicated by the red arrow) boosts the cold air flow, but causes a smaller temperature drop. This ability to adjust is crucial for the Vortex Tube\u2019s flexibility.<\/p>\n You can set the Cold Fraction as low as 20%, which means that a small portion (20% to be precise) of the supply air is sent to the cold end, resulting in a significant temperature drop. On the flip side, you can crank it up to 80%, meaning that most of the supply air heads to the cold end, but the temperature drop won\u2019t be as drastic. Our 34XX Series Vortex Tubes are designed for Cold Fractions between 20-50%, while the 32XX Series caters to 50-80% Cold Fractions.<\/p>\n So how do you select the right model for you? To determine this, you need to know what temperature and flow will best serve your application. For most situations, the ~20\u00b0F produced by an 80% cold fraction is sufficiently cold. At this cold fraction, you will get the most flow (80% of the inlet supplied). Applications like welding or brazing benefit from higher flows. When your starting temperature is hundreds of degrees Fahrenheit, there is little difference in blowing -20\u00b0F air vs +20\u00b0F. What you need is more volume to strip away the heat as quickly as possible. In this instance, a 32XX series is the way to go.<\/p>\n If you need lower flow, or to achieve extremely cold temperatures, then the 34XX series would be the best choice. A chocolate maker took advantage of the lower flow rates offered by this type of Vortex Tube as they didn\u2019t want the airflow to disturb the surface of the chocolate as it cooled, affecting the finish. The greater temperature drop allowed for rapid cooling without reducing quality.<\/p>\n Whatever your cooling application, our Vortex Tubes will likely be able to help. If you would like to discuss it, please give us a call!<\/p>\n Al Wooffitt Send me an\u00a0Email<\/a>![\"\"](\"https:\/\/i0.wp.com\/blog.exair.com\/wp-content\/uploads\/2018\/09\/vortex-tube-hot-valve-adjustment-e1537967356186.png?resize=368%2C408&ssl=1\")
<\/a><\/figure>\n<\/div>\n![\"\"](\"https:\/\/i0.wp.com\/blog.exair.com\/wp-content\/uploads\/2019\/10\/vtce_pr559px.jpg?resize=559%2C699&ssl=1\")
<\/a><\/figure>\n<\/div>\n
Application Engineer<\/p>\n
Find us on\u00a0the Web<\/a>
Like us on\u00a0Facebook<\/a>
Twitter:\u00a0@EXAIR_AW<\/a><\/p>\nLike this:<\/h3>\n