{"id":175507,"date":"2025-04-07T12:35:35","date_gmt":"2025-04-07T12:35:35","guid":{"rendered":"https:\/\/peraltafinancing.com\/recipes\/category-a-b\/beer\/exbeeriment-smoked-malt-44-vs-63-usage-rate-in-a-rauchbier\/"},"modified":"2025-04-07T12:35:35","modified_gmt":"2025-04-07T12:35:35","slug":"exbeeriment-smoked-malt-44-vs-63-usage-rate-in-a-rauchbier","status":"publish","type":"post","link":"https:\/\/fivemor.com\/?p=175507","title":{"rendered":"exBEERiment | Smoked Malt: 44% vs. 63% Usage Rate In A Rauchbier"},"content":{"rendered":"


\n<\/p>\n

\n

Author: Will Lovell<\/em><\/h4>\n\n

According the BJCP, Rauchbier is described as basically \u201ca beechwood-smoked, malty, amber German lager\u201d with a generally M\u00e4rzen-like profile that\u2019s made with a \u201csizeable quantity\u201d of smoked malt. What exactly does this mean? A review of multiple recipes available online indicate usage rates ranging from a low of about 20% to upwards of 60%, though as a base malt, it can be used as 100% of the grist.<\/p>\n

While loathed by many, Rauchbier certainly has a captured the hearts of a segment of beer drinkers and brewers, and the amount of smoked malt to use is a topic of debate, with some contending it should be the majority of the malt bill while others prefer a more nuanced smoke character. Indeed, claims have been made that too much smoked malt can lend an unpleasant phenolic flavor, to the point the desired campfire and bacon are replaced by ashy and medicinal notes.<\/p>\n

I happen to be among the few who love Rauchbier, which was unquestionably inspired by my experiences drinking it while living in Germany. Unsurprisingly, it\u2019s also a style I enjoy brewing, and I\u2019ve anecdotally found that 45% smoked malt gets me where I want to be. However, I recently began to wonder about the impact using more smoked malt might have, particularly if there\u2019s a sort of saturation point of smoke character, so I designed an xBmt to see for myself.<\/p>\n

| PURPOSE |<\/h2>\n

To evaluate the differences between a Rauchbier made with 44% smoked malt and one made with 63% smoked malt.<\/p>\n

| METHODS |<\/h2>\n

For this xBmt, I went with a Rauchbier recipe<\/a> I\u2019ve had good luck with in the past, replacing a portion of the Pilsner malt with additional smoked malt in one batch.<\/p>\n

Rauch Your Socks Off<\/em><\/h3>\n
\n
\n

Recipe Details<\/h3>\n\n\n\n\n\n\n
Batch Size<\/th>\nBoil Time<\/th>\nIBU<\/th>\nSRM<\/th>\nEst. OG<\/th>\nEst. FG<\/th>\nABV<\/th>\n<\/tr>\n<\/thead>\n
5.5 gal<\/td>\n60 min<\/td>\n23.2<\/td>\n11 SRM<\/td>\n1.053<\/td>\n1.013<\/td>\n5.25 %<\/td>\n<\/tr>\n
\nActuals<\/strong><\/td>\n1.053<\/td>\n1.013<\/td>\n5.25 %<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
\n

Fermentables<\/h3>\n\n\n\n\n\n\n\n\n
Name<\/th>\nAmount<\/th>\n%<\/th>\n<\/tr>\n<\/thead>\n
Smoked Malt<\/td>\n8.75 lbs<\/td>\n62.78<\/td>\n<\/tr>\n
Czech Pilsen Malt<\/td>\n3 lbs<\/td>\n21.52<\/td>\n<\/tr>\n
Munich I<\/td>\n1.937 lbs<\/td>\n13.9<\/td>\n<\/tr>\n
Carafa I<\/td>\n4 oz<\/td>\n1.79<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
\n

Hops<\/h3>\n\n\n\n\n\n\n
Name<\/th>\nAmount<\/th>\nTime<\/th>\nUse<\/th>\nForm<\/th>\nAlpha %<\/th>\n<\/tr>\n<\/thead>\n
Hersbrucker<\/td>\n45 g<\/td>\n60 min<\/td>\nBoil<\/td>\nPellet<\/td>\n4.3<\/td>\n<\/tr>\n
Hersbrucker<\/td>\n21 g<\/td>\n5 min<\/td>\nBoil<\/td>\nPellet<\/td>\n4.3<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
\n

Yeast<\/h3>\n\n\n\n\n\n
Name<\/th>\nLab<\/th>\nAttenuation<\/th>\nTemperature<\/th>\n<\/tr>\n<\/thead>\n
Harvest (L17)<\/td>\nImperial Yeast<\/td>\n74%<\/td>\n50\u00b0F – 60.1\u00b0F<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
\n

Notes<\/h3>\n\n\n\n
Water Profile: Ca 58 | Mg 0 | Na 0 | SO4 73 | Cl 48<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<\/p><\/div>\n

\"\"<\/a><\/h2>\n

I started my brew day by adding identical volumes of water to separate Delta Brewing AIO units, adjusting each to the same mineral profile, and setting the controllers to heat them up before milling the grain.<\/p>\n

\"\"<\/a><\/p>\n

When the water for each batch was adequately heated, I incorporated the grains then set the controllers to maintain them at the same target mash temperature, at which point I prepared the kettle hop additions.<\/p>\n

\"\"<\/a><\/p>\n

Once each 60 minute mash was complete, I removed the grains then proceeded to boil the worts for 60 minutes, adding hops as listed in the recipe.<\/p>\n

\"\"<\/a><\/p>\n

When the worts were done boiling, I took refractometer readings showing both were at nearly the same OG.<\/p>\n

\"\"<\/a>
Left: 44% smoked malt 1.054 OG | Right: 63% smoked malt 1.053 OG<\/figcaption><\/figure>\n

I transferred identical volumes of wort from each batch to Delta Brewing FermTanks<\/a> that were attached to my glycol system and left to finish chilling to my desired fermentation temperature. Within 10 minutes, both worts were stabilized at 64\u00b0F\/18\u00b0C, so I pitched a pouch of\u00a0Imperial Yeast L17 Harvest<\/a> into each.<\/p>\n

\"\"<\/a><\/p>\n

With signs of activity absent 2 weeks later, I took hydrometer measurements indicating fermentation was complete.<\/p>\n

\"\"<\/a>
Left: 44% smoked malt 1.013 FG | Right: 63% smoked malt 1.012 FG<\/figcaption><\/figure>\n

The beers were cold crashed to 34\u00b0F\/1\u00b0C overnight, after which they were pressure transferred to CO2 purged kegs that were placed on gas in my keezer. After 4 weeks of lagering, the beers were ready for evaluation.<\/p>\n

\"\"<\/a>
Left: 44% smoked malt | Right: 63% smoked malt<\/figcaption><\/figure>\n

| RESULTS |<\/h2>\n

A total of 27 people of\u00a0varying levels of experience<\/a> participated in this xBmt. Each participant was served 2 samples of the beer made with 44% smoked malt and 1 sample of the beer made with 63% smoked malt in different colored opaque cups then asked to identify the unique sample. In order to reach statistical significance, 14 tasters (p\n<\/p>\n

My Impressions:\u00a0<\/em><\/strong>Out of the 5 semi-blind triangle tests I attempted, I correctly identified the odd-beer-out every time. For me, the aroma differences were a dead giveaway, as the version made with more smoked malt had a stronger smoke character than the one made with less smoked malt. While both beers were great, I was somewhat surprised to discover I preferred the batch made with 64% smoked malt.<\/p>\n

| DISCUSSION |<\/h2>\n

Rauchbier is a traditional German smoked lager that gets its smokey character from smoked malt, which is typically germinated and kilned over burning hardwood. While it can make up the entire grain bill, the recommended usage rate ranges from about 20% to 60%, though some feel there\u2019s a sort of saturation point where amounts beyond that threshold contribute little to no perceptible increases in smokiness. Indeed, tasters in this xBmt were unable to reliably distinguish a Rauchbier made with 44% smoked malt from one made with 63% smoked malt.<\/p>\n

While it\u2019s certainly possible these results are a true indication of diminishing returns when using smoked malt, another plausible explanation has to do with the tasters\u2019 familiarity with and preference for Rauchbier. Smoked beers are an acquired taste, and for those who have minimal experience drinking them, or simply don\u2019t like them, the differences in smoke pungency would likely be difficult to perceive through the unusual flavor of the beers. This might explain my own ability to consistently distinguish these beers, as I not only have ample experience drinking Rauchbier, but I also love the style.<\/p>\n

Over the many batches of Rauchbier I\u2019ve brewed, I settled on using around 45% of smoked malt, in part because it was over double the recommended usage rate for the style, and I\u2019ve been happy with the results. However, despite blind tasters being largely unable to tell these beers apart, I was quite easily able to do so, and I definitely preferred the one made with more smoked malt. As such, I\u2019ll be adapting my house Rauchbier recipe to include a higher proportion of smoked malt!<\/p>\n

If you have any thoughts about this xBmt, please do not hesitate to share in the comments section below!<\/em><\/p>\n\n

Support Br\u00fclosophy In Style!<\/h2>\n

\"tshirts_all2020\"<\/a><\/p>\n

All designs are available in various colors and sizes on Amazon<\/a>!<\/p>\n\n

Follow Br\u00fclosophy on:<\/em><\/h4>\n

FACEBOOK<\/a> \u00a0 | \u00a0 TWITTER<\/a>\u00a0 \u00a0| \u00a0 INSTAGRAM<\/a><\/h3>\n\n

\"patreon_banner\"<\/a><\/p>\n\n

If you enjoy this stuff and feel compelled to support Brulosophy.com, please check out the\u00a0Support<\/a>\u00a0page\u00a0for details on how you can very easily do so. Thanks!<\/em><\/p>\n

\n

Like this:<\/h3>\n

Like<\/span><\/span> Loading…<\/span><\/p>\n

<\/div>\n

Related<\/em><\/h3>\n<\/p><\/div>\n