EXAIR\u2019s Super Air Wipe<\/a> is a quiet and efficient solution for your pipe or cable blowoff. They are specifically engineered for drying, cleaning or cooling a variety of extruded shapes. The 360\u00b0 uniform airflow produced by the Super Air Wipe<\/a> will be more effective, while using less compressed air than a comparable solution using an array of nozzles. They are also easy to insert into your process due to the split design, allowing you to clamp the Air Wipe around your material without the need for threading.<\/p>\n The Super Air Wipe comes in two different materials \u2013 aluminum and stainless steel, with various stock sizes. Our aluminum models are available in sizes from 3\/8\u2033 to 11\u2033, and stainless is available from 1\/2\u2033 to 4\u2033. As with all EXAIR\u2019s other stock products, these are available for same-day or next-day shipping, and are covered under our 30-day unconditional guarantee. The aluminum models are rated for temperatures of up to 400\u00b0F, while the stainless steel are good up to 800F.<\/p>\n We also provide Super Air Wipe Kits to get the most out of your Super Air Wipe. A kit will include the Super Air Wipe itself, a filter<\/a>, a regulator<\/a>, and a shim set. The filter will remove bulk liquids and debris from the compressed air to keep performance optimal. The regulator is used to fine-tune the force provided by the Super Air Wipe. This helps to not over-use the amount of compressed air required for the job.<\/p>\n \n![\"\"](\"https:\/\/i0.wp.com\/blog.exair.com\/wp-content\/uploads\/2018\/02\/super-air-wipe-family-photo.jpg?resize=760%2C139&ssl=1\")
<\/a>